1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL 2. Remove the air breather hose. Air Breather Hose > REMOVAL 3. Remove the control valve body. Control Valve Body > REMOVAL 4. Remove the transmission harness. Transmission Harness > REMOVAL 5. Remove the turbine speed sensor. Turbine Speed Sensor > REMOVAL 6. Remove the secondary speed sensor. Secondary Speed Sensor > REMOVAL 7. Remove the primary speed sensor. Primary Speed Sensor > REMOVAL 8. Remove the inhibitor switch. Inhibitor Switch > REMOVAL 9. Remove the extension case. Extension Case > REMOVAL 10. Remove the transfer clutch assembly. Transfer Clutch > REMOVAL 11. Remove the transfer driven gear assembly. Transfer Driven Gear > REMOVAL 12. Remove the parking pawl. Parking Pawl > REMOVAL 13. Remove the reduction driven gear assembly. Reduction Driven Gear > REMOVAL 14. Remove the oil pan and oil strainer. Oil Pan and Strainer > REMOVAL 15. Remove the transmission control device. Transmission Control Device > REMOVAL 16. Remove the transmission case. Transmission Case > REMOVAL 17. Remove the reduction drive gear. Reduction Drive Gear > REMOVAL 18. Remove the primary pulley, secondary pulley and variator chain. Primary Pulley and Secondary Pulley > REMOVAL 19. Remove the reverse brake assembly. Reverse Brake Assembly > REMOVAL 20. Remove the forward clutch assembly. Forward Clutch Assembly > REMOVAL 21. Using the ST, remove the drive pinion retainer.
22. Remove the O-rings. |
Inspection
1. Measure the resistance between connector terminals.Preparation tool:Circuit testerConnectorTerminal No.Inspection conditionsStandard(a)1 — 3OpenLess than 1 -4 — 3CloseLess than 1 -(b)1 — 3Tilt downLess than 1 -4 — 3Tilt upLess than 1 -2. Replace the sunroof switch if the inspection result ...