1. Disconnect the ground terminal from battery sensor. NOTE 2. While pressing the shift lock release button, shift the select lever to the “N” range. 3. Lift up the vehicle. 4. Remove the center exhaust pipe. Center Exhaust Pipe > REMOVAL 5. Remove the snap pin and washer.
6. Remove the spring pin and shifter arm.
7. Disconnect the inhibitor harness connector. 8. Remove the inhibitor switch. |
Remote keyless entry system
CAUTION
Do not expose the remote transmitter
to severe shocks, such as
those experienced as a result of
dropping or throwing.
Do not take the remote transmitter
apart except when replacing
the battery.
Do not get the remote transmitter
wet ...