Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
CAUTION: • Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself. • Be careful not to spill CVTF on the exhaust pipe to prevent it from emitting smoke or causing a fire. If the CVTF adheres, wipe it off completely. 1. Lift up the vehicle. 2. Remove the under cover - front. 3. Clean the transmission exterior. 4. Remove the CVTF drain plug to drain CVTF. 5. Remove the oil pan. CAUTION: Be careful not to allow foreign matter such as dust or dirt to enter the oil pan.
6. Remove the magnet. 7. Remove the oil strainer.
8. Remove the O-ring from oil strainer.
|
Inspection
• Check each part for damage or dust.• Check oil strainer for clogging. ...
Other materials:
Assembly
1. Before assembly, check each part. Front Strut > INSPECTION2. Using a coil spring compressor, compress the coil spring.CAUTION:When installing the coil spring compressor to the coil spring, follow the operation manual accompanied with the coil spring compressor during operation.NOTE:Make sure tha ...
