Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
CAUTION: • Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part. • When secondary speed sensor is removed, CVTF leaks. After installing the secondary speed sensor, adjust the CVTF level. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Lift up the vehicle. 3. Disconnect the harness connector from the secondary speed sensor. 4. Remove the secondary speed sensor.
|
Inspection
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A), and loosen the clamps (B) and (C).3. Remove the air intake boot, and move it to the left side wheel apron.4. Disconn ...
Other materials:
Installation
1. Install the TCM.Tightening torque:7 N·m (0.7 kgf-m, 5.2 ft-lb)2. Install the harness connector to TCM.NOTE:Move the lock lever in the arrow direction, and confirm that a clicking sound is heard.3. Insert the transmission case cover (small) between transmission case cover (large) and transm ...
