1. Remove the transmission from the vehicle. Automatic Transmission Assembly > REMOVAL 2. Remove the extension case. Extension Case > REMOVAL 3. Remove the rear drive shaft. Rear Drive Shaft > REMOVAL 4. Remove the transfer clutch assembly. Transfer Clutch > REMOVAL 5. Remove the transfer reduction driven gear. Transfer Reduction Driven Gear > REMOVAL 6. Remove the intermediate case. Intermediate Case > REMOVAL 7. Remove the thrust needle bearing. 8. Remove the forward clutch assembly. 9. Remove the washer. |
Inspection
1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Measure the resistance between relay terminals.Terminal No.Inspection conditionsStandardCircuit1 — 2Always1 M- or more1 — 2Apply battery voltage between terminals 4 and 3.Less than ...