CAUTION: • Be sure to prevent water or oil from contacting the connector terminal of front wheel speed sensor. If adhesion occurs, replace with a new part. • When removing front wheel speed sensor, CVTF may let out. If CVTF has leaked, adjust the CVTF level after installing the front wheel speed sensor. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Lift up the vehicle. 3. Clean the transmission exterior. 4. Remove the front wheel speed sensor harness connector. 5. Remove the front wheel speed sensor. |
Dtc u0028 heater control panel communication error
DTC DETECTING CONDITION:UART communication failureTROUBLE SYMPTOM:• Unable to operate A/C.• DTC “U0028” HEATER CONTROL PANEL COMMUNICATION ERROR was detected.WIRING DIAGRAM:Air conditioning system Air Conditioning System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK CONNECTOR.Check ...