Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL

2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL

3. Remove the oil pump chain cover.

4. Remove the seal ring from center support COMPL.

5. Remove the driven sprocket from oil pump chain cover to remove the oil pump chain.

NOTE:

The driven sprocket is replaced as an assembly only, because it is a non-disassembly part.

6. Remove the snap ring.

7. Remove the drive sprocket.

8. Remove the oil seal from the oil pump chain cover.

Oil pump chain
...

Assembly
1. DRIVE SPROCKET1. Using the ST, install the ball bearing.NOTE:Use a new ball bearing.ST 499755602PRESS SNAP RING ...

Other materials:

Activating and deactivating the alarm system
To change the setting of your vehicle's alarm system for activation or deactivation, do the following.  Disarm the alarm system. Refer to "Disarming the system" .  Sit in the driver's seat and shut all doors (and the rear gate (Outback)).  Turn the ignition switch to the ...

© 2017-2024 Copyright www.sulegacy.com