1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL 2. Remove the oil pan and control valve body. Control Valve Body > REMOVAL 3. Remove the inhibitor switch. Inhibitor Switch > REMOVAL 4. Remove the spring pin. NOTE: Prevent the spring pin from dropping in the transmission using paper towel etc. 5. Remove the bolt and remove the range select lever, manual plate and parking rod. NOTE: Do not damage the lip of oil seal press-fitted in the case.
6. Remove the detent spring. |
Dtc p0011 "a" camshaft position - timing over-advanced or system performance bank 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine stalls.• Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCE ...