Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Transmission control module (tcm) / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the air cleaner case. Air Cleaner Case > REMOVAL

3. Move the lock lever in the arrow direction while pressing the lock button, and disconnect the connector.

(A)	Lock button
(B)	Lock lever

4. Remove the TCM.

Transmission control module (tcm)

...

Installation

1. Install the TCM.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the harness connector to TCM.NOTE:• Install the connector in the reverse order of removal.• Move the lo ...

Other materials:

Dtc b2902 rear height sensor circuit
DTC DETECTING CONDITION:Rear vehicle height sensor error is detected for 10 seconds or more.TROUBLE SYMPTOM:The auto headlight beam leveler does not operate.CAUTION:Initialization is required after replacing the SRF CM.WIRING DIAGRAM:Headlight beam leveler system Headlight Beam Leveler System > WIR ...