Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

X mode switch

...

Inspection

1. CHECK SWITCH UNITMeasure the resistance between connector terminals of the X mode switch. Terminal No.StandardOFF (when measured without operating the switch)No. 1 — No. 41 M- or moreON (when mea ...

Other materials:

Installation
1. Remove the front differential assembly.2. Hypoid gear set match mark/No.: The number (A) on top of the drive pinion, and the number on the hypoid driven gear are set numbers for the two gears. Use a pair having the same numbers.The figure (B) below shows a number for shim adjustment. If no number ...