Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from battery sensor. NOTE 2. Lift up the vehicle. 3. Remove the center exhaust pipe. Center Exhaust Pipe > REMOVAL 4. Remove the center exhaust cover.
5. Remove the clamp cable and take out the MT gear shift cable from the clamp.
6. Remove the dust cover. (OUTBACK model)
7. Apply a mark on the top end of the MT gear shift cable. 8. Remove the snap pin.
9. Remove the shift bracket together with the MT gear shift cable.
10. Remove the plate cable assembly.
11. Remove the spring at the MT gear shift cable by expanding it and pulling down, and remove the MT gear shift cable from the gear shift lever assembly. CAUTION: Be careful not to deform the cable inner.
12. Remove the clamp which holds the MT gear shift cable.
13. Pull out the MT gear shift cable. |
Installation
1. When replacing the new MT gear shift cable, secure it to shift bracket with the clamps, be careful not to mistake the installing direction.(A)Old MT gear shift cable(B)New MT gear shift cable(C)Shi ...
Other materials:
Certification for the Hands-free system
This device complies with Part 15 of FCC
Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject
to the following two conditions: (1) this
device may not cause harmful interference,
and (2) this device must accept any
interference received, including interference
that m ...
