1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the front bumper. Front Bumper > REMOVAL 3. Disconnect the connector from ambient sensor. 4. Disconnect the connector from the active grille shutter actuator. 5. Remove the bolts securing the active grille shutter to remove the active grille shutter. 6. Remove the clip (A) to remove the ambient sensor. |
Dtc p0604 internal control module random access memory (ram) error
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Engine does not start.• Engine stalls.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CH ...