1. ENGINE SIDE 1. Disconnect the ground terminal from battery sensor. NOTE 2. Drain engine coolant. Engine Coolant > REPLACEMENT 3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL 4. Disconnect the radiator outlet hose from thermostat cover. 5. Remove the thermostat cover, and then remove the gasket and thermostat.
2. CVTF COOLER (WITH WARMER FEATURE) SIDE NOTE: Thermostat on the CVTF cooler (with warmer feature) side is featured on CVT models. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Drain engine coolant. Engine Coolant > REPLACEMENT 3. Lower the vehicle. 4. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot. 5. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move it to the left side wheel apron. 6. Disconnect the engine coolant hose from the thermostat cover. 7. Remove the thermostat cover, and then remove the gasket and thermostat.
|
Terms
Packet write
This is a general term that describes
the process of writing data on-demand to
CD-R, etc., in the same way that data is
written to floppy or hard discs.
ID3 tag
This is a method of embedding trackrelated
information in an MP3 file. This
embedded informat ...