Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Cooling(h4do) / Water pump / Removal

1. WATER PUMP PULLEY

1. Remove the V-belts. V-belt > REMOVAL

2. Remove the water pump pulley using the ST.

ST1 18355AA000

PULLEY WRENCH

ST2 18334AA030

PULLEY WRENCH PIN SET

2. WATER PUMP

1. Remove the water pump pulley. Water Pump > REMOVAL

2. Drain engine coolant. Engine Coolant > REPLACEMENT

3. Remove the water pump from the oil pan upper.

1. Check that the water pump pulley does not have deformation, cracks and any other damage.2. Check the water pump bearing for smooth rotation.3. Make sure the impeller is not abnormally deformed or d ...

Other materials:

Dtc p0351 ignition coil "a" primary control circuit/open
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM: ...