Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Lift up the vehicle, and then remove the rear wheels. 2. Remove the nut - axle. CAUTION: Do not loosen the nut - axle while the rear axle is loaded. Doing so may damage the hub unit COMPL. (1) Lift the crimped section of the nut - axle. (2) Remove the nut - axle using a socket wrench while depressing the brake pedal.
3. Remove the rear disc rotor. Rear Disc Rotor > REMOVAL 4. Remove the hub unit COMPL - rear axle. CAUTION: • Be careful not to damage the magnetic encoder. • Do not get closer the tool which charged magnetism to magnetic encoder.
NOTE: If it is hard to remove, use the ST. Preparation tool: ST1: AXLE SHAFT PULLER (926470000) ST2: AXLE SHAFT PULLER PLATE (28099PA110)
|
Assembly
1. Install the hub unit COMPL - rear axle to the ST securely.Preparation tool:ST: HUB STAND (28099PA080)(1)Hub unit COMPL - rear axle2. Using a press, press new bolts - hub (b) until their seating sur ...
Other materials:
Removal
CAUTION:• Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself.• Be careful not to spill CVTF on the exhaust pipe to prevent it from emitting smoke or causing a fire. If the CVTF adheres, wipe it off c ...
