1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Remove the heater control assembly. Control Panel > REMOVAL 3. Remove the cover assembly - front and the console box assembly. Console Box > REMOVAL 4. Release the claws, and then remove the panel center LWR. 5. Remove the screws and remove the pocket assembly - CTR. 6. While releasing the claw, press it in from the rear to remove the socket assembly. |
Dtc p2135 throttle/pedal position sensor/switch "a"/"b" voltage correlation
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM: ...