Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

1. TWEETER

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the trim panel - front pillar UPR. Upper Inner Trim > REMOVAL

3. Remove the speaker assembly - tweeter.

(1) Release the clips and claws, then detach the grille speaker side.

(2) Remove the screws.

Preparation tool:

Stubby screwdriver

(3) Disconnect the connector and remove the speaker assembly - tweeter.

2. CENTER SPEAKER

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the speaker assembly - center.

(1) Release the clips and claws, then detach the grille speaker center.

NOTE:

Remove the grille speaker center by using a plastic remover.

(2) Remove the screws.

Preparation tool:

Stubby screwdriver

(3) Disconnect the connector and remove the speaker assembly - center.

3. DOOR SPEAKER

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE

2. Remove the trim panel - front door. Door Trim > REMOVAL

3. Remove the speaker assembly - front door.

(1) Disconnect the connector.

(2) Remove the screws and remove the speaker assembly - front door.

Front speaker
...

Installation
1. TWEETER1. Install the speaker assembly - tweeter.2. Install the grille speaker side.3. Install the trim panel - front pillar UPR. Upper Inner Trim > INSTALLATION4. Connect the ground terminal to b ...

Other materials:

Air inlet selection
Select the air inlet by pressing the air inlet selection button. ON position (recirculation): Interior air is recirculated inside the vehicle. Press the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road. When the ON posit ...

© 2017-2024 Copyright www.sulegacy.com