Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / Power amplifier / Removal

NOTE:

Remove the power amplifier assembly after sliding the passenger’s seat back and forth as necessary.

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the power amplifier - assembly.

(1) Remove the harness clip, and disconnect each connector.

(2) Remove the nut and remove the power amplifier - assembly.

Installation

1. Install the power amplifier - assembly.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Operation
If the EyeSight pause code is detected from the stereo camera, all the functions of the EyeSight excluding the conventional cruise control stop temporarily and cannot be used. When the failure is resolved, the function starts operating.1. On «Start» display, select «Diagnosis».2. On «Vehicle se ...