Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. SATELLITE SWITCH ASSEMBLY CAUTION: Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Set the tire to the straight-ahead position. 2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 3. Remove the driver’s airbag module. Driver’s Airbag Module > REMOVAL 4. Remove the steering wheel. Steering Wheel > REMOVAL 5. Remove the satellite switch assembly. Steering Wheel > DISASSEMBLY 2. TELEMATICS BUTTON The telematics button is a single unit with the overhead console or stereo camera cover assembly. For operation procedures, refer to “LIGHTING SYSTEM” section. Spot Map Light > REMOVAL |
Inspection
1. SATELLITE SWITCH ASSEMBLY1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard6 — 2VOL (+)VOL (−)SEEK ()SEEK ()LISTR ...
Other materials:
If your vehicle is involved in an accident
CAUTION
If your vehicle is involved in an
accident, be sure to inspect the
ground under the vehicle before
restarting the engine. If you find that
fuel has leaked on the ground, do
not try to restart the engine. The fuel
system has been damaged and is in
need of repair ...
