1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the trim panel - rear door. Door Trim > REMOVAL 3. Remove the sealing cover - rear door. CAUTION: • Carefully remove the butyl tape. Excessive force will easily break the cover. • If the sealing cover - rear door gets broken, replace it with a new part. • Be careful not to allow the butyl tape to contact any trims and seats because the butyl tape, which has a strong adhesive force, is difficult to remove once it adhered. (1) Remove the screw to remove the bracket - door trim rear. (2) Disconnect connectors. (3) Carefully remove the butyl tape to remove the sealing cover - rear door. |
Inspection
1. INSPECTION WHEN LOW ENGINE OIL WARNING LIGHT ILLUMINATES ON LCDSTEPCHECKYESNO1.CHECK ENGINE OIL LEVEL.Is engine oil level normal- Oil Level Switch > INSPECTIONReplace engine oil or refill, and check again while the oil level is normal condition. Engine Oil > REPLACEMENTTo disable the low engine ...