NOTE: Refer to “Security and Locks” section for key cylinder replacement. Key Lock Cylinders > REMOVAL 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the pocket assembly. (1) Remove the damper COMPL - pocket. (2) Release the stoppers and remove the pocket assembly by pulling it toward you. 3. Remove the cover side sill - front and the front cover - side sill. Lower Inner Trim > REMOVAL 4. Remove the back panel - pocket. (1) Release the hook, and remove the under cover assembly - passenger. (2) Remove the clips, and remove the cover - instrument panel side RH. (3) Release the clips, and remove the ornament - panel assembly passenger. (4) Disconnect the glove box light LED connector. (5) Remove the screws, claws and harness clamp, then remove the back panel - pocket. |
General precautions when starting/stopping
engine
WARNING
Never start the engine from outside
the vehicle (except when
using the remote engine start
system). It may result in an
accident.
Do not leave the engine running
in locations with poor ventilation,
such as a garage and indoors.
The exhau ...