1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Remove the clips, and remove the cover - instrument panel side LH. NOTE: Remove the weather strip - body side flange to facilitate the work. 3. Remove the data link connector and release the hook, and then remove the under cover assembly - driver. 4. Remove the cover assembly - instrument panel LWR driver. CAUTION: When removing the cover assembly - instrument panel LWR driver, be sure to pull it toward you. If attempting to remove by turning it upward, the claws may be damaged. (1) Remove the screws and release the clips and claws. (2) Disconnect the harness connectors, and remove the cover assembly - instrument panel LWR driver. |
Tire care - maintenance and safety practices
Check on a daily basis that the
tires are free from serious damage,
nails, and stones. At the same time,
check the tires for abnormal wear.
Inspect the tire tread regularly
and replace the tires before their
tread wear indicators become visible.
When a tire's tread wear
indi ...