1. Remove the clips, and remove the trim panel - trunk lid. 2. Pull the release lever in the trunk room, and then tilt the backrest forward. 3. Remove the mat - trunk. 4. Remove the trim panel - trunk rear. (1) Remove the clip. (2) Release the claws, and remove the trim panel - trunk rear. 5. Remove the trunk trim panel - side. (1) Remove the hook. (1) Turn the hook to 90°. (2) Press the claw using a screwdriver to detach the hook. (2) Release the clips and remove the trunk trim panel - side. |
Dtc p0776 pressure control solenoid "b" performance/stuck off
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine speed increases abruptly, and can not accelerate.• Excessive slippage is felt.1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYES ...