Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Front suspension / Front stabilizer / Removal

1. Lift up the vehicle, and then remove the left and right front wheels.

2. Remove the front under cover. Front Under Cover > REMOVAL

3. Remove the front stabilizer.

(1) Remove the left and right stabilizer links.

(2) Remove the left and right stabilizer brackets.

(3) Turn the front stabilizer by approximately 180° toward the front of the vehicle and pull out the front stabilizer from the right side of the vehicle.

(1)	Turn toward the front of the vehicle.
(2)	Front side of vehicle

Installation

1. Before installation, inspect the following items and replace any faulty part with a new one.• Check the bushing for abnormal cracks, fatigue or damage.• Check the stabilizer link for da ...

Other materials:

Active test operation
CAUTION:After executing the system operation check mode, execute the Clear Memory Mode Clear Memory Mode > OPERATION.NOTE:• *: After replacing ECM or active grille shutter, be sure to perform this procedure.• For detailed operation procedures, refer to “Application help”.1. ...