Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h4do) / Camshaft position sensor / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the air intake duct. (RH side only) Air Intake Duct > REMOVAL

3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.

• RH side

• LH side

1. CAMSHAFT POSITION SENSOR1. Disconnect the ground terminal from battery sensor. NOTE2. Prepare an oscilloscope.3. While pressing the section (A) shown in the figure, move the lock lever (B) in the ...

Other materials:

Operation
1. BRAKE LAMP LIGHTING OPERATION MODE BY SUBARU SELECT MONITORCAUTION:By executing the compulsory operation for the brake lamp relay, the electronic parking brake warning light may illuminate. After the brake light relay compulsory operation is executed, refer to “Basic Diagnostic Procedure&rd ...

Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Camshaft position sensor

Inspection

Other materials: