Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. While pressing the section (A) shown in the figure, move the lock lever (B) in the direction of the arrow to disconnect the connectors from the ECM in numerical order as shown in the figure.

3. Remove the ECM from the ECM bracket.

4. Remove the connector (A) and connector (B) from the ECM bracket, and remove the clip (C) securing the harness.

5. Remove the ECM bracket from the vehicle.

Engine control module (ecm)
...

Inspection
Check that the ECM has no deformation, cracks or other damages. ...

Other materials:

Dtc c1571 brake lamp relay off stuck
DTC DETECTING CONDITION:A fault is detected if the stop light relay operation request were compared with the feedback signal and detected as follows:• The feedback signal is OFF.• The stop light relay operation request is ON.TROUBLE SYMPTOM:• EyeSight does not operate. (Models with ...

© 2017-2024 Copyright www.sulegacy.com