Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the air intake duct. (RH side only) Air Intake Duct > REMOVAL 3. Disconnect the connector (A) from the intake oil control solenoid, and remove the intake oil control solenoid from the chain cover. • RH side
• LH side
|
Inspection
1. Check that the oil control solenoid has no deformation, cracks or other damages.2. Measure the resistance between the oil control solenoid terminals.Terminal No.Standard1 and 27.25±0.4 - (when 20& ...
Other materials:
Removal
1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the air breather hose. Air Breather Hose > REMOVAL3. Remove the oil pan and control valve body. Control Valve Body > REMOVAL4. Remove the transmission harness. Transmission Harness > REMOVAL5 ...
© 2017-2024 Copyright www.sulegacy.com
