1. INTAKE SIDE 1. Remove the collector cover. (1) Carefully pull up the rear of collector cover at two positions (A). (2) Carefully pull up the front of collector cover at two positions (B) while moving it forward. 2. Disconnect the ground terminal from battery sensor. NOTE 3. Remove the fuel injector. Fuel Injector > REMOVAL 4. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor. • RH side • LH side 2. EXHAUST SIDE 1. Disconnect the ground terminal from battery sensor. NOTE 2. Lift up the vehicle. 3. Remove the under cover. Front Under Cover > REMOVAL 4. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor. • RH side • LH side |
Replacement
1. DRAINING OF ENGINE COOLANT1. Lift up the vehicle.2. Remove the under cover. Front Under Cover > REMOVAL3. Connect a hose with inner diameter of φ8 mm (0.315 in) to the drain outlet of the radiator.4. Loosen the drain plug to drain engine coolant into a container.NOTE:Remove the radiator cap ...