Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Remove the collector cover. (1) Carefully pull up the rear of collector cover at two positions (A). (2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.
2. Disconnect the ground terminal from battery sensor. NOTE 3. Loosen the clamp (A) securing the air intake boot. 4. Remove the bolt (B) securing the air intake boot to the collector cover bracket.
5. Remove the air intake boot from the throttle body and the air cleaner case (rear), and move it to the left side wheel apron.
6. Disconnect the connector (A) from the throttle body, and remove the throttle body from the intake manifold. NOTE: Do not disconnect the preheater hose.
7. Remove the service hole plug.
8. Disconnect the connector (A) from the crankshaft position sensor, and remove the crankshaft position sensor from the cylinder block.
|
Inspection
1. CRANKSHAFT POSITION SENSOR1. Disconnect the ground terminal from battery sensor. NOTE2. Prepare an oscilloscope.3. While pressing the section (A) shown in the figure, move the lock lever (B) in th ...
Other materials:
Dtc b2601 lin circuit low
DTC DETECTING CONDITION:LIN communication circuit with the body integrated unit is shorted for a certain period of time (4000 ms) or more.TROUBLE SYMPTOM:Seat operation is possible with manual operation, but not with memory function.Registration is possible with memory switch, but not with keyless a ...
