Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Remove the collector cover. (1) Carefully pull up the rear of collector cover at two positions (A). (2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.
2. Disconnect the ground terminal from battery sensor. NOTE 3. Drain engine coolant. Engine Coolant > REPLACEMENT 4. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
|
Inspection
1. Check that the engine coolant temperature sensor has no deformation, cracks or other damages.2. Immerse the engine coolant temperature sensor and a thermometer in water.CAUTION:Take care not to all ...
Other materials:
Dtc c1362 normal closing valve 2
DTC DETECTING CONDITION:A fault is detected if electrical malfunction judgment is generated for VDCH/U solenoid valve.TROUBLE SYMPTOM:• ABS does not operate.• EBD does not operate.• VDC does not operate.• Hill hold does not function.• EyeSight does not operate. (Models ...
