1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the trunk trim panel assembly - side on the RH side. (Sedan model) Rear Quarter Trim > REMOVAL 3. Remove the right side rear quarter trim. (OUTBACK model) Rear Quarter Trim > REMOVAL 4. Remove the fuel pump control unit. • Sedan model • OUTBACK model 5. Disconnect the connector from fuel pump control unit. |
Installation
1. Check that the mark on the cap - pivot wiper faces up.2. Install the motor assembly - rear wiper.(1) Install the bolts, and install the motor assembly - rear wiper.Tightening torque:6 N·m (0.6 kgf-m, 4.4 ft-lb)(2) Install the harness connector of the motor assembly - rear wiper.3. Install ...