1. Remove the collector cover. (1) Carefully pull up the rear of collector cover at two positions (A). (2) Carefully pull up the front of collector cover at two positions (B) while moving it forward. 2. Disconnect the ground terminal from battery sensor. NOTE 3. Remove the intake manifold. Intake Manifold > REMOVAL 4. Disconnect the connector (A) from the knock sensor, and remove the knock sensor from the cylinder block. |
Touch screen operation
This system is operated mainly by the
keys on the screen.
When a screen key is touched, a beep
sounds. You can set the beep sound.
Refer to "Unit settings" .
NOTE
If the system does not respond to
touching a screen key, move your
finger away from the screen and touch
it agai ...