1. Disconnect the ground terminal from battery sensor. NOTE 2. Lift up the vehicle. 3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL 4. Apply spray-type lubricant (004301003) or equivalent to the threaded portion of rear oxygen sensor, and leave it for one minute or more. 5. Remove the rear oxygen sensor. CAUTION: When removing the rear oxygen sensor, wait until exhaust pipe cools, otherwise it will damage the exhaust pipe.
|
Dtc b2285 steering lock position signal correlation
DTC DETECTING CONDITION:When the steering lock position signal transmitted from the steering lock CM via solid line and the steering lock position signal transmitted via LIN communication system do not match.TROUBLE SYMPTOM:• There are conditions when the steering lock is not released.• ...