Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. DRIVER’S SIDE 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL 3. Remove the bolts, and then remove the panel - knee guard.
4. Remove the motor - actuator mix. (1) Disconnect the connector. (2) Remove the screws and detach the motor - actuator mix.
2. PASSENGER’S SIDE 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the pocket assembly and the back panel - pocket. Glove Box > REMOVAL 3. Remove the motor - actuator mix. (1) Disconnect the connector. (2) Remove the screws and detach the motor - actuator mix.
|
Inspection
1. ACTUATOR LINK1. Visually check the operating range of the link, and remove the foreign matter if any.2. Operate the temperature control switch, and check that the link operates normally.3. If it do ...
Other materials:
Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Disconnect the connector (A) from the oi ...
