1. CENTER GRILLE ASSEMBLY 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the panel - center grille assembly. (1) Release the clips and claws. (2) Detach the connectors, and remove the panel - center grille assembly. (3) Remove the switch - hazard. Hazard Switch > REMOVAL 2. SIDE GRILLE ASSEMBLY Release the claws and clips, then detach the grille assembly - ventilation. • LH side • RH side 3. REAR GRILLE ASSEMBLY 1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Remove the cover assembly - front and the console box assembly. Console Box > REMOVAL 3. Remove the screws, and remove the duct - console rear. Heater Duct > REMOVAL 4. Release the claws and remove the end cover - console box. 5. Remove the screws and remove the grille assembly - rear heater. |
Replacement
1. Release the parking brake.2. Using the Subaru Select Monitor, go to the brake maintenance mode according to the display screen. Parking Brake System > OPERATIONNOTE:For detailed operation procedures, refer to “Application help”.3. Disconnect the ground terminal from battery sensor. ...