Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Hvac system (heater ventilator and a c) / In-vehicle sensor (auto a c model) / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL

3. Release the claws and remove the in-vehicle sensor.

In-vehicle sensor (auto a c model)

...

Inspection

1. Set the vehicle to the following conditions.ItemConditionIgnition switchONAC switchONTemperature adjustment dialHI (MAX HOT)Air flow control switchDEFFan switchHI (MAX)2. Check the suction port (a) ...

Other materials:

Inspection
1. CLUTCH START SWITCH1. Perform the following inspections. If the clutch start switch does not operate normally, adjust the switch, and check it again. Clutch Switch > ADJUSTMENT• Make sure that engine does not start with clutch pedal not depressed.• Make sure that engine starts with c ...