CAUTION: Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Remove the instrument panel assembly and the beam COMPL - steering. Instrument Panel Assembly > REMOVAL 3. Remove the duct - foot assist. (1) Turn over the floor carpet and remove the slide lock of the duct - rear heater. (2) Remove the screws, and remove the duct - foot assist. 4. Remove the screws and remove the motor assembly - rear heater. |
Vehicle load limit - how to determine
The load capacity of your vehicle is
determined by weight, not by available
cargo space. The load limit of
your vehicle is shown on the
vehicle placard attached to the
driver's side B-pillar. Locate the
statement "The combined weight
of occupants and cargo should
never exceed XXX kg or XXX l ...