Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL 3. Remove the bolts, and then remove the panel - knee guard.
4. Release the lock and remove the relay holder.
5. Remove the auto headlight beam leveler CM. (1) Remove the nut. (2) Disconnect the connector and remove the auto headlight beam leveler CM.
|
Installation
1. Install the auto headlight beam leveler CM.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the relay holder.3. Install the panel - knee guard.Tightening torque:7 N·m (0.7 k ...
Other materials:
Dtc b1838 short in curtain shield airbag lh squib circuit (to +b)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Short circuit failure in power supply (shorted in main harness power supply, shorted in curtain airbag LH power supply, shorted in airbag CM internal circuit power supply)CAUTION:Before performing diagnosis, refer to ...
