Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. SEDAN MODEL 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the trim panel - trunk lid. Trunk Room Trim > REMOVAL 3. Remove the bulb socket and back-up light bulb. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
2. OUTBACK MODEL 1. Disconnect the ground terminal from battery sensor. NOTE 2. Release the claws and remove the bulb inspection cover of rear gate trim.
3. Remove the bulb socket and back-up light bulb. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
|
Installation
1. SEDAN MODEL1. Install the back-up light bulb.CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.2. Install the trim panel - trunk lid.3. Connect the g ...
Other materials:
Assembly
1. DIFFERENTIAL CASE ASSEMBLY1. Install the differential bevel gear and differential bevel pinion together with adjusting washer, and insert the pinion shaft.NOTE:Face the chamfered side of adjusting washer toward differential bevel gear.(A)Pinion shaft(B)Differential bevel pinion(C)Differential bev ...
