Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Door switch / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the switch assembly - door.

(1) Remove the screws, and pull out the switch assembly - door toward you.

(2) Disconnect the connector and remove the switch assembly - door.

1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandardFront LH: 1 — 2Except for front LH: 1 — 4When the switch is not presse ...

Other materials:

Removal
CAUTION:Brake fluid spilled on the vehicle body will harm the paint surface; therefore, wash it off with water and wipe clean quickly if spilled.1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A) from the air intake boot.3. Loosen the clamp (B) connecting the air inta ...