Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Front fog light assembly / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Lift up the vehicle.

3. Remove the clips, and turn over the mud guard - front.

4. Remove the fog light assembly - front.

(1) Disconnect the connector.

(2) Remove the screws and clips, and remove the fog light assembly - front.

• Sedan model

• OUTBACK model

Adjustment

1. FOG LIGHT AIMING1. Before checking the fog light beam level, be sure of the following:• Check the area around the fog light for any scratches, damage or other type of deformation.• The ...

Other materials:

Engine low oil level warning indicator
This indicator appears when the engine oil level decreases to the lower limit. If the engine low oil level warning indicator appears while driving, park the vehicle at a safe and level location, and then check the engine oil level. When the engine oil level is not within the normal range, re ...