CAUTION: Do not perform work with wet hands, because there is a possibility of electrical shock. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the bumper face - front. Front Bumper > REMOVAL 3. Remove the cover - front fender. (1) Remove the clip. (2) Release the claws, and then remove the cover - front fender UPR. 4. Remove the bolts, and then remove the bracket - front bumper corner. 5. Remove the light assembly - head. (1) Disconnect the connector. (2) Remove the bolts and clips, and remove the light assembly - head. |
Dtc u0423 invalid data received from instrument panel cluster control module
DTC DETECTING CONDITION:Defective data was transmitted from combination meter.TROUBLE SYMPTOM:Display of combination meter does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure with Dia ...