Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. HIGH BEAM CAUTION: • Do not perform work with wet hands, because there is a possibility of electrical shock. • Do not leave the light assembly - head without the bulb for a long time. Dust, moisture, etc. entering the light may affect its performance. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the high beam bulb. Headlight Assembly > DISASSEMBLY 2. LOW BEAM CAUTION: • Do not perform work with wet hands, because there is a possibility of electrical shock. • Do not leave the light assembly - head without the bulb for a long time. Dust, moisture, etc. entering the light may affect its performance. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the low beam bulb. Headlight Assembly > DISASSEMBLY • Halogen type: Headlight Assembly > DISASSEMBLY • HID type: Headlight Assembly > DISASSEMBLY |
Headlight bulb
...
Installation
1. HIGH BEAM1. Install the high beam bulb. Headlight Assembly > ASSEMBLY2. Connect the ground terminal to battery sensor. NOTE2. LOW BEAM1. Install the low beam bulb. Headlight Assembly > ASSEMBLY2 ...
Other materials:
Electrical component location location
(1)VDC control module and hydraulic control unit (VDCCM&H/U)(6)Brake light relay(10)Hill hold switch(2)VDC OFF switch(7)Magnetic encoder(11)Engine control module (ECM)(3)Combination meter(8)ABS wheel speed sensor(12)Transmission control module (TCM) (engine type FB)(4)Steering angle sensor(9)Parking ...
