NOTE: Do not remove the luggage room light if removing the bulb only. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the luggage room light. (1) Release the claws. (2) Disconnect the connector and remove the light assembly - luggage room. 3. Release the claws, and detach the lens and bulb. CAUTION: • Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. • When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage. |
Installation
1. FRONT ANTENNA1. Install the front antenna assembly - interior.2. Install the console front duct.3. Install the pocket assembly - CTR. External Connection Terminal > REMOVAL4. Install the console box assembly.5. Connect the ground terminal to battery sensor. NOTE2. CENTER ANTENNA1. Install the c ...