1. SEDAN MODEL 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the trunk trim panel - side. Trunk Room Trim > REMOVAL 3. Remove the rear side marker light bulb. Rear Combination Light Assembly > DISASSEMBLY 2. OUTBACK MODEL 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the light assembly - rear combination. Rear Combination Light Assembly > REMOVAL 3. Remove the rear side marker light bulb. Rear Combination Light Assembly > DISASSEMBLY |
Installation
1. RH SIDE1. Install the spark plugs using a spark plug socket.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the ignition coil.CAUTION:Degrease the ignition coil fixing portion and the ignition coil mounting bolt.Tightening torque:8.0 N·m (0.8 kgf-m, 5.9 ft-lb)3. Connect t ...