Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Side turn signal light assembly / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the side turn signal light assembly. Outer Mirror Assembly > DISASSEMBLY

Side turn signal light assembly

...

Installation

1. Install the side turn signal light assembly. Outer Mirror Assembly > ASSEMBLY2. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Dtc p2610 ecm/pcm engine off timer performance
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK FOR ANY OTHER DTC ON DISPLAY.Is an ...