Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Lubrication(h4do) / Oil pressure switch / Removal

CAUTION:

If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.

1. Disconnect the ground terminal from battery sensor. NOTE

2. Disconnect the connector (A) from the oil pressure switch, and remove the oil pressure switch from the chain cover.

CAUTION:

Catch the engine oil using cloth to prevent it from splashing.

Inspection

1. Check that the oil pressure switch does not have deformation, cracks or damage.2. Check the oil pressure switch installation portion for oil leakage and oil seepage. ...

Other materials:

Preparation for overhaul procedure
1. After removing the engine from the vehicle body, attach the ST to the engine as shown in the figure.NOTE:When using a commercially sold engine stand, follow the instructions of engine stand used.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)ST 18232AA000ENGINE STAND2. In this section ...