CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire. 1. Drain engine coolant. Engine Coolant > REPLACEMENT 2. Drain the engine oil. Engine Oil > REPLACEMENT 3. Remove the engine oil cooler water pipe (A), water hose (B) and water hose (C) as a unit, and disconnect the water hose (D) from the oil cooler. 4. Remove the oil filter. Engine Oil Filter > REMOVAL 5. Remove the oil cooler connector and remove the engine oil cooler.
|
Initial screen
When the ignition switch is in the "ACC" or
"ON" position, the initial screen will be
displayed and the system will begin
operating.
When using the SUBARU STARLINK
function (if equipped), the display screen
may be different from the screen above.
After a few seconds, the cauti ...