1. OIL PAN LOWER 1. Lift up the vehicle. 2. Remove the under cover. Front Under Cover > REMOVAL 3. Drain the engine oil. Engine Oil > REPLACEMENT 4. Remove the bolts securing the oil pan lower to the oil pan upper. 5. Insert an oil pan cutter blade into the gap between oil pan upper and oil pan lower, and remove the oil pan lower. CAUTION: Do not use a screwdriver or similar tool in place of oil pan cutter. 2. OIL PAN UPPER For removing the oil pan upper, refer to “Cylinder Block”. Cylinder Block > REMOVAL |
Dtc b16b7 short in side satellite sensor bus lh (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Shorted between side sensor LH circuit and GND circuitWIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Airbag system Airbag System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK POOR CONTAC ...