1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the clip (A) from the air intake boot. 3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear). 4. Loosen the clamp (C) which connects the air intake boot and throttle body. 5. Remove the air intake boot from the throttle body, and move it to the left side wheel apron. 6. Disconnect the connector back-up light switch & neutral position switch.
7. Lift up the vehicle. 8. Remove the back-up light switch & neutral position switch with the harness.
|
Wiring diagram
1. MODEL WITHOUT PUSH BUTTON IGNITION SWITCH(1)Ignition switch(5)Key warning switch(9)TCM (shift range information)(2)Accessory 1 relay(6)Battery(10)Key lock solenoid(3)IG2 relay(7)Body integrated unit(11)Shift lock solenoid(4)Stop light switch(8)VDC CM (vehicle speed information)(12)“P” ...